23
October
2020
|
09:59
Europe/Amsterdam

MAN presents its mobile coronavirus test vehicle: PCR test results available within one hour

Summary

MAN Truck & Bus has developed a unique, innovative diagnostic vehicle in cooperation with recognised experts from the health sector, which can be used to detect SARS CoV-2 infections safely and quickly at hotspots. The rolling laboratory is based on the MAN TGE van. With more than 500 tests per vehicle and day, the rolling laboratory is perfectly suited for carrying out tests directly on site if a potential infection is suspected, for example in old people's homes, schools, companies or other institutions. With the help of the MAN Coronavirus diagnostic vehicle, chains of infection can thus be interrupted in a targeted manner.

  • MAN’s test vehicle will help to contain the coronavirus pandemic
  • PCR test results in line with the highest medical standards are available directly on site within one hour
  • More than 500 test results are possible per vehicle each day

The innovative MAN coronavirus test vehicle will make a vital contribution to containing the Covid-19 pandemic by providing fast PCR test results on site. The quicker that everyone involved at a new coronavirus hotspot are tested, including all the suspected cases, the more effectively outbreaks and any further spread of the virus can be stopped. In addition to easy planning of the mobile test vehicle’s deployment, the speed of the tests is another advantage of this innovative product. With the innovative molecular diagnostic PCR test equipment Vivalytic from Bosch Healthcare Solutions on board the MAN TGE, test results are available within 39 minutes. These PCR test devices are currently among the fastest approved devices on the market. The entire process including smear, sample preparation and testing therefore takes less than an hour.

When deployed for mobile use, for example at border crossings along the motorway, the MAN coronavirus test vehicle displays another of its strengths: flexibility. Test capacities can, for example, be quickly relocated as required and deployed exactly where they are needed. The mobile test vehicle is also digital. Four tasks can be performed in it in one continuous process: swab sampling, testing, analysis and communication. The PCR test results are digitally transferred from the test device to a laptop in real time. That enables a quick report to be sent directly from the MAN van to the responsible health authorities, departments, or to the person tested.

The benefits of the MAN coronavirus test vehicle at a glance:

  • Flexible testing where it is most urgently needed, e.g. at regional hotspots
  • Preventive testing on site possible, e.g. before events with large numbers of people
  • Reduction in production losses at companies (involvement of the company’s medical services)
  • Simple testing of patients with limited mobility, e.g. in care or retirement homes
  • Fast identification and isolation of infected people
  • Clear reduction in process times
  • Relief for general practitioners and laboratories

Two different vehicle designs are available: one with a standard wheelbase and 3.5 t gross combination weight and one with a long wheelbase and 5.5 t gross combination weight. The short version serves as a mobile diagnostic vehicle and is equipped with up to 16 Vivalytic test devices by aprimeo diagnostics, a Bosch distribution partner involved in the development. The Bosch Vivalytic test devicesare used in specially manufactured rack systems. The swab tests are taken outside the vehicle where qualified medical staff take care of the patients. This deployment scenario, with a high throughput of people being tested, is especially suitable for care homes, schools, large events or companies.

The impressive feature of the long version is that it is highly flexible in its use, with a separate room for taking swabs located inside the vehicle and awnings on both sides to create additional capacity. This enables a quicker and more frequent change of location. The long version is equipped with 8 PCR test devices. In order to maintain a one-way system when taking swabs, the MAN TGE has been equipped with two automatic lateral sliding doors.

The mobile MAN coronavirus test vehicle is powered by a 2.0 l turbo diesel engine with 177 hp. It can be optionally provided with all-wheel drive and an 8-speed automatic gearbox. The standard fittings include hygienic surfaces, automatic sliding doors, air conditioning system and an auxiliary air-conditioning system as well as an automatic step. As optional extras, the vehicle can be equipped with up to two washbasins (for the test and swab room), a computer workstation with a 220 V connection and a refrigerator.

Both vehicles are fitted with a MAN TeleMatics box to enable internet access. Other equipment options include:

  • Closed awning, secured on three sides with tent tarpaulin, to carry out swab tests
  • Special signal system, LED emergency light, radio equipment pre-installed
  • 400 litre swivel and rollable waste box, with 43 kg payload, mounted to the trailer coupling

In this project, it is not only the vehicle that is unique but also the rapid collaboration from recognised experts in their field. The result is an innovative, practical overall system to contain the coronavirus pandemic. The idea and concept for the mobile coronavirus test vehicle comes from Leeloo Medical and MAN Truck & Bus. The ambulance service provider, MKT-Krankentransport, has contributed its expertise in dealing with patients. MAN and AMS Ambulanzmobile are converting the vehicles in line with medical and epidemiological standards. The inspection and risk assessment of the vehicle was carried out by an expert for epidemiological protection from the Medizinischen Katastrophen-Hilfswerk Deutschland e.V. (MHW). And finally, MAN Truck & Bus has contributed its decades of expertise in implementing special vehicle concepts and their marketing.

The new MAN coronavirus test vehicle for rapid SARS-CoV-2 test results can be used throughout Europe (EU 27+3) and is now available to order. The first two test vehicles were completed in October 2020.

Boilerplate

The vehicles and products displayed on this website may differ in terms of shape, design, colour and scope of supply. Some of the images may include special equipment, accessories and decorative elements which are subject to an additional charge. The technical features and equipment of the vehicles described are merely examples and may differ, in particular on a country-specific basis. We reserve the right to make changes at any time.

Our vehicles are equipped with summer tyres as standard. Please check possible national regulations about whether winter tyres are required. Your MAN partner will be happy to advise you.

The specified fuel consumption and emission data has been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. It is currently still required by law to state the NEDC figures for vehicles for passenger transport with registration class M1. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering.

Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle.

Efficiency classes rate vehicles for passenger transport with an M1 passenger vehicle registration, according to the CO2 emissions under consideration of the empty vehicle weight. Vehicles which conform to the average are classified as D. Vehicles which are above the current average are classified as A+, A, B or C. Vehicles which are below average are classified as E, F or G.

Additional information regarding the official fuel consumption, and the official specific CO2 emissions of new vehicles for passenger transport, with an M1 passenger vehicle registration, can be found in the “Guide on the fuel economy, CO2-Emissions, and power consumptions of all New Passenger Car Models”. This guideline is available free of charge at all sales points and from the DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Str. 1, 73760 Ostfildern-Scharnhausen, Germany. (https://www.datgroup.com/)

In vehicle classes N1, N2 and M2, coolant of the type R134a is used. MAN TGEs of vehicle class M1 require coolant of the type R1234yf. The GWP value of the coolant used is 1.430 (coolant type R134a) and 4 (coolant type R1234yf). The fill levels depend on the coolant compressor and varies between 560 - 590 grams.